If you want to change your devices' power saving mode, that is to say, that they should save on battery when they do not detect movement, you can easily do this in SweTrack Live. Note that you can only see the power saving modes that your specific device supports.
SweTrack Live for mobile
1. Open the sidebar menu (the icon with three horizontal lines).
2. Tap Home.
3. Tap your device in the list.
4. Select which power saving mode you want to active.
Note that the device has to first register a new position before the power saving mode change can go through.
SweTrack Live for browsers
1. Log in to your SweTrack Live account at www.swetrack.com/live.
2. Click Devices in the sidebar menu.
3. Click on your device in the list.
4. Select which power saving mode you want active.
Note that the device has to first register a new position before the power saving mode change can go through.
Explanation of power saving modes:
Standard Power Saving Mode is what is set as standard and means that the device will "sleep" when it does not detect any movement. This is to save both the device's internal battery and the external battery. When the device then detects movement, it will then be activated again. Standard power saving mode means that the GPS-transmitter stops sending data to the server and that everything on the circuit board is shut down except for the radio chip which enables mobile coverage. This means that the device can quickly jump back on to online when it detects movement again.