We would like to congratulate you on choosing a SweTrack Lite+. Once you have mounted your tracker in the vehicle, you will always know where the vehicle is. Here we describe the simple steps you need to take for your SweTrack Lite+ to work.
Package contents
Package contains the GPS tracker, an instruction manual and a wiring harness to connect the GPS tracker to the vehicle's electrical system.
Create an account and add your device
Before installing your SweTrack Lite+, you first need to create an account and register your new device on SweTrack Live.
On your mobile, you do this by first searching for and downloading the SweTrack Live app from either the AppStore or Google Play. If you have an Android phone, use Google Play and if you have an iPhone, use the AppStore.
To create an account, click on the 'Sign Up' button at the bottom of the login screen in SweTrack Live. Then, enter your email address, choose a password, and select a username. Finally, enter the IMEI number of your SweTrack Lite device. You can find it on the box or on the product itself. Either manually enter the IMEI number or press the camera icon and point your phone's camera at the QR code on the bottom of the product's box.
You can also create an account and register your new device on a computer. Go to www.swetrack.com/live and click on 'Register'. Enter your email address, choose a password, and select a username. Finally, enter the IMEI number of your SweTrack Lite device. You can find it on the box or on the product itself. Once you're done, click on 'Create Account' and log in with your new credentials.
Activate a Data Plan
- Go to the web app www.swetrack.com/live and log in to your account. If you do not have an account, click on “Sign up”, follow the instructions and then log in.
- Navigate to the "Data Plans" page. If you're using a computer, click on the icon that looks like a card in the menu on the left. If you're using a mobile device, tap the hamburger menu and then select "Data Plans".
- Click on “Add Card” and fill in your card details.
- Click the "Activate" button and select the data plan that suits you. Then follow the on-screen instructions.
Remember: The device needs to take a valid position to appear on the map after the data plan has been activated. The easiest way to do this is by shaking the device outdoors or going for a walk/drive around the block. It may take up to 20 minutes for the data plan to activate on your device.
Installation
You are now ready to install your SweTrack Lite+. The product is intended for connection directly to the electrical system in your vehicle. To install the product, you must first connect the wiring that is in the package to the GPS tracker itself. To do this, connect the wiring to the GPS tracker through the circular quick connector located on the GPS tracker. Then connect the black cable to a negative terminal in your vehicle, and the red cable to a positive terminal.
The orange cable is a switch cable that can be connected to the ignition switch. You then have the opportunity to receive push notifications from the SweTrack Live app if the vehicle's ignition is switched on or off. However, using this cable is completely optional - the only thing needed for the product to work is that you connect the black and red cables.
Installation of the power relay
SweTrack Lite+ has the ability to control external electrical equipment through the use of a relay. This relay is not included with the device and has to be bought separately in any construction stores. You can use the relay to control power supply to external devices, such as the start motor. We strongly recommend that you let a professional handle the relay connection if you choose to use it. SweTrack accepts no liability for damage to product or property resulting from improper installation. Note that improper use of the relay can damage both product and property. SweTrack does not take responsibility for damage caused by the use of the relay.
To connect the relay, you should connect the yellow cable from the product's cable harness to pin 85 on the relay to enable Lite+ to ground the control circuit. Then, connect the remaining cables according to the instructions provided with the purchased relay.